UMT SETUP
UMTv2_UMTPro_UltimateMTK2_0.2 :-- link
umt new set up all in one link :- link
UMT Card updater : - mega
Umt spd tool link :-. link
UMT Support :-- drive
avenger_sprd_installer :-- link
umt pro mtk :-- link
GSM : -- link 5.54
- UMTv2_UMTPro_QcFire_v6.6 – Download
- UMTv2_UMTPro_QcFire_v6.5 – Download
- UMTv2_UMTPro_QcFire_v7.2 - download
- UMT MTK Tool – Download
- UMTv2 UMTPro UltimateEMMC Tool – Download
- UMT Support Access – Download
- UMTv2_UMTPro_UltimateHST_v0.1 – Download
- UMT FRP Tool – Download
- UMT_Samsung Tool – Download
- UMTPro GSM Tool – Download
- UMT LG Tool – Download
- UMTv2_UMTPro_QcFire: Download | Mirror (v5.6)
- UMTv2_UMTPro_Huawei: Download (v1.2)
- UMTv2_UMTPro_UltimateFRP: Download (v0.5)
- UMTv2_UMTPro_UltimateMTK: Mediafire : Drive (4.4)
- UMTv2_UMTPro_GSM: Download (v5.4)
- UMT Support Access: Download (v2.0)
- UMTv2_UMTPro_UltimateLG: Download (v0.5)
- UMTv2_UMTPro_UltimateSamsung: Download (v0.2 : New Module Added)
- UltimateNCKHuawei_Flasher: Download (v127)
- Avenger Box Setup for UMT PRO: Download
- UMTv2_UMTPro_CDMA_v2.0: Download
UMTv2/UMTPro UltimateMTK2 v0.2 - Oppo and Xiaomi IMEI and more..
Added Xiaomi and Oppo IMEI Repair
- Both IMEI is supported
- Please unlock bootloader first
- Incase bootloop after BL unlock, just wipe data from recovery
- Tested SoCs:
- MT6765
- MT6761
- MT6771
- MT6779
- Should work on others also except 5G chipsets
Changed Connection Settings for users familiar with old module
- Unticking Disable Auth will also disable options not supported without exploit
- You must use Disable Auth for secured phones
- Crash Preloader will not work on newer device and you must use Testpoint for them
- Preloader mode will not work for secured devices unless you have secure DA
Added Select Preloader Prompt
- If dump preloader failed, it will prompt you to select preloader
- For phones connected with testpoint, preloader need to be selected by user
Improved DA selection and handling
- Now software will try to pickup first supported DA from DA folder
- It has no effect if user has selected custom DA
Updated Mi Relock Fix
- Now devices with dual slot are supported
- Not all firmware are supported, if it does not work, try downgrade
Resized GUI to fit low resolution screens
Added Context Menu in Logs
Changed Installation Folder
- Now you can use old module in parallel with new module
- Once all functions are moved to new module, old module will be eradicated
Important Notes:
- You can flash device with both BROM and Preloader mode
- If default DA does not work, use own DA in custom DA
- Force BROM may not work on new security, use Test Point instead
- When using Test Point, you must select Preloader in PL (not needed when flashing)
- If you need to connect device in Preloader mode,
you must select PRELOADER in connection settings, otherwise software will try to
Crash Preloader (may not work on new security devices)
Note : Some features are device/OS specific and may not work on all devices.
Comments
Post a Comment